Description
MULTIBOR 31123 is a compact carbide cone nail drill bit with a blue medium cut and cross-shaped teeth. Its narrow 2 mm working diameter and 15 mm working length make it suitable for precise nail correction and controlled removal of artificial nail material in smaller or hard-to-reach areas.
The tapered cone shape allows targeted work around the nail surface, while the carbide construction is designed for use with an electric nail drill.
Key Features
-
Brand: MULTIBOR
-
Model: 31123
-
Product type: Carbide nail drill bit
-
Shape: Cone
-
Cut type: Cross-shaped teeth
-
Cut color: Blue
-
Abrasiveness: Medium
-
Working diameter: 2 mm
-
Working length: 15 mm
-
Shank diameter: 2.35 mm
-
Compatibility: HP straight handpiece
-
Direction: Left-handed version
The 606602 (31123) model is listed with a 2 mm head diameter, 15 mm working length and 2.35 mm shank. The catalog identifies it as a left-handed bit for nail service.
Applications
MULTIBOR 31123 can be used for:
- Controlled removal of gel and artificial nail materials
- Nail length and shape correction
- Refining artificial nail extensions
- Removing excess material in narrow areas
- Detailed work around the nail surface
- Selected manicure and nail correction procedures
Its narrow working diameter is suitable for areas where a more compact working surface is required.
How to Use
Select the rotation speed according to the material and procedure. Work with light, controlled movements and avoid excessive pressure or prolonged contact in one area.
When working close to the natural nail plate, use appropriate technique and avoid unnecessary contact with the natural nail.
Disinfection
- After use, place the carbide bit into a suitable disinfectant solution. Follow the concentration and exposure time specified by the disinfectant manufacturer.
- Clean the working surface from material residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, an ultrasonic cleaner is recommended.
- Rinse under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization
Autoclave:
Place the cleaned and completely dried bit into a sterilization pouch, seal it and process in an autoclave.
Recommended cycle: 132°C, 2 bar, 20 minutes.
Dry heat:
Place the cleaned and dried bit into a dry-heat sterilizer.
Recommended cycle: 180°C, 60 minutes.
