Description
Carbide Nail Drill Bit 100801 is a fine-cut carbide bit with a frustum / rounded cone shape and parallel teeth. The slim 4 mm working diameter and red fine cut provide controlled material removal, making the bit suitable for precise correction of artificial nails, refining gel and acrylic material, and finishing work during e-file manicure and pedicure.
Key Features
-
Frustum / rounded cone shape for controlled filing and correction
- 4 mm working diameter
- 13 mm working surface length
-
Red marking — fine cut
- Fine parallel teeth
- Made from carbide
- Suitable for controlled removal of artificial nail material
- Suitable for e-file manicure and pedicure
- Compact 4 mm diameter for more precise work
The exact 100801 specification identifies the cutting pattern as fine parallel, with a 4 mm diameter and 13 mm working length. Another technical catalog specifies the red cut as approximately 40 μm.
Applications
Carbide Nail Drill Bit 100801 is suitable for:
- Correcting gel and acrylic nail enhancements
- Removing thin layers of artificial nail material
- Refining the shape of extended nails
- Removing excess material during nail correction
- Smoothing and refining artificial nail surfaces
- Finishing work after more intensive material removal
- Selected e-file manicure and pedicure procedures
The red fine cut is particularly useful when more controlled material removal is needed rather than the aggressive reduction provided by coarse green carbide bits. Comparable 4 × 13 mm red frustum carbide bits are specifically intended for artificial-material removal, shaping and correction.
Red Fine Parallel Cut
The red marking indicates a fine cutting level. Unlike cross-cut carbide bits, the 100801 features parallel teeth, providing a different cutting action suited to controlled filing and finishing.
Its 4 mm diameter also makes the bit convenient for areas where a larger 5–6 mm carbide bit may provide less precise access.
How to Use
Insert the bit into a compatible e-file handpiece and select the rotation speed according to the material and procedure. Work with smooth, continuous movements and light pressure.
The fine red cut is suitable primarily for controlled correction and removal of artificial nail material. Avoid excessive filing directly on the natural nail plate.
Specifications
| Specification |
Details |
| Model |
100801 |
| Type |
Carbide nail drill bit |
| Shape |
Frustum / rounded cone |
| Working diameter |
4 mm |
| Working surface length |
13 mm |
| Cut marking |
Red |
| Abrasiveness |
Fine |
| Tooth shape |
Parallel |
| Material |
Carbide |
| Application |
E-file manicure, pedicure, artificial nail correction |
| Quantity |
1 pc |
The 4 × 13 mm dimensions, fine red cut and parallel tooth pattern are confirmed for article 100801.
Disinfection & Sterilization
Disinfection:
- After use, place the carbide bit into a suitable disinfectant solution. The concentration and exposure time depend on the disinfectant used and should follow its manufacturer's instructions.
- Clean the working surface from product residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, the use of an ultrasonic cleaner is recommended.
- Rinse the bit under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization:
Autoclave: Place the cleaned and dried bit into a sterilization pouch and seal it before placing it in the autoclave.
Sterilization cycle: 132°C, 2 bar, 20 minutes.
Dry heat sterilization: Place the cleaned and dried bit into a dry-heat sterilizer.
Sterilization cycle: 180°C, 60 minutes.
