Description
Carbide Nail Drill Bit 406901 features a rounded cone shape, green coarse cross-cut and 5 mm working diameter. It is designed for fast removal of artificial nail materials, including gel and acrylic, as well as nail correction and selected manicure, pedicure and podology procedures.
Key Features
-
Rounded cone shape for controlled work across the nail surface
- 5 mm working diameter
- 14 mm working surface length
-
Green marking — coarse cut
-
Cross-shaped cutting pattern for active material removal
- Carbide construction
-
2.35 mm shank compatible with standard e-file handpieces
- Suitable for manicure, pedicure and podology
- Designed for gel, acrylic and other artificial materials
Applications
The 406901 carbide bit is suitable for:
- Removing gel and acrylic
- Removing artificial nail coatings during correction
- Reducing the thickness of dense artificial material
- Correcting the shape and length of extended nails
- Working with thickened nail plates
- Selected pedicure and podology procedures
- Processing callused and hardened areas when appropriate
Green Coarse Cross-Cut
The green marking indicates a coarse cut. The large cross-shaped teeth are designed for active material removal and efficient processing of dense materials. The rounded end of the cone also makes the bit suitable for controlled work around the nail folds.
How to Use
Insert the bit into a compatible e-file handpiece and select the rotation speed according to the material and procedure. Work with controlled movements and moderate pressure, avoiding prolonged contact in one area.
The coarse green cut is intended primarily for dense artificial materials and material reduction rather than aggressive filing of the natural nail plate.
Disinfection & Sterilization
Disinfection:
- After use, place the carbide bit into a suitable disinfectant solution. The concentration and exposure time depend on the disinfectant selected by the nail technician and must follow the manufacturer's instructions.
- Clean the working surface from product residue and filings using a bur-cleaning brush made of nylon or brass.
- For more effective cleaning, the use of an ultrasonic cleaner is recommended.
- Rinse the bit under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization:
Autoclave:
Place the cleaned and dried bit into a sterilization pouch and seal it before placing it in the autoclave.
Sterilization cycle: 132°C, 2 bar, 20 minutes.
Dry heat sterilization:
Place the cleaned and dried bit into a dry-heat sterilizer.
Sterilization cycle: 180°C, 60 minutes.
Important: Disinfection, cleaning and sterilization should be performed according to the instructions for the specific equipment and disinfectant used.
