HEYLOVE Frame Gel Milk Tea 30 ml is a warm milk beige builder gel with a soft nude character. The creamy beige tone works beautifully for natural-looking manicures and can also be used for nail extensions, structural modeling, shape correction and strengthening.
The Frame Gel formula has a medium creamy texture that allows the material to be distributed evenly across the nail. It gradually self-levels to help create a smooth architectural surface and can reduce the amount of filing required after curing.
The material combines high hardness with medium elasticity, helping the finished structure retain its shape while allowing a certain degree of flexibility. A thin layer remains flexible, while an approximately 1 mm architectural layer provides a firm structure with slight shock absorption and resistance to chipping.
Key features of HEYLOVE Frame Gel Milk Tea:
- Warm milk beige shade
- Medium creamy consistency
- Self-leveling formula
- High hardness
- Medium elasticity
- Virtually odorless
- HEMA-free
- TPO-free
- CPNP-notified
- Moderate sticky dispersion layer
- Moderate polymerization heat, not exceeding 37 °C
- Suitable for upper and lower forms
- Suitable for nail shape restoration and strengthening
- Suitable for reconstruction using the bevel/border technique
- Suitable for extensions without filing
- Curing time: 60–120 seconds in a 48 W LED lamp
- Volume: 30 ml
- Packaging: jar with sealed valve, without pump
The 30 ml jar with a sealed valve and no pump is intended for dispensing the gel with a spatula. After taking the required amount, the material can be applied and shaped with a separate nail brush.
How to Use:
Follow these simple steps to get the best results from the Frame Gel Milk Tea 30ml:
-
Step 1: Buff the nail plate with a 180-grit file or a 100-grit buffer to remove the shine and prep the surface.
-
Step 2: Clean the nails with a nail dehydrator to remove any dust and moisture, paying special attention to the cuticle area and sidewalls.
-
Step 3: Apply a dehydrator and wait 30 seconds for it to dry.
-
Step 4: Apply a thin layer of Rubber Base and cure for 30 seconds under the UV/LED lamp. Add another layer to smooth out the surface.
-
Step 5: Press the pump and dispense the desired amount of Frame Gel. Apply it as an architectural layer or place it into the upper or lower forms, depending on your technique.
-
Step 6: Cure each nail for 30 seconds, and then cure both hands for 1-2 minutes for optimal results.
-
Step 7: Remove the sticky layer from the Frame Gel and file or buff the surface if needed for a smoother finish.
-
Step 8: Apply a top coat such as No Sticky or Dark Story and cure for 2 minutes for a glossy, durable finish.
-
Step 9: Using a carbide nail drill bit, carefully file out the natural nail from underneath in the free-edge area.
-
Step 10: Gently smooth the free edge with a buffer, taking care not to damage the coated surface.
FAQ Heylove Frame Gel Milk Tea:
1. What color is HEYLOVE Frame Gel Milk Tea?
HEYLOVE Frame Gel Milk Tea is a warm milk beige shade with a soft nude appearance.
2. What can HEYLOVE Frame Gel Milk Tea be used for?
It can be used for nail extensions, structural modeling, shape restoration, strengthening and reconstruction.
3. Can Milk Tea Frame Gel be used with upper forms?
Yes. The formula is suitable for modeling with upper forms.
4. Can HEYLOVE Frame Gel Milk Tea be used with lower forms?
Yes. It can also be used for extensions with lower forms.
5. Does HEYLOVE Frame Gel Milk Tea self-level?
Yes. The material self-levels after application, helping create an even architectural surface.
6. What consistency does Milk Tea Frame Gel have?
It has a medium creamy consistency that provides a balance between controlled placement and self-leveling.
7. Is HEYLOVE Frame Gel Milk Tea HEMA-free?
Yes. The updated formula is HEMA-free.
8. Is HEYLOVE Frame Gel Milk Tea TPO-free?
Yes. The formula is TPO-free.
9. Does the gel have a strong smell?
No. HEYLOVE Frame Gel Milk Tea is virtually odorless.
10. How hard is the cured Frame Gel Milk Tea?
The material has high hardness combined with medium elasticity, allowing it to retain the modeled shape.
11. Does HEYLOVE Frame Gel Milk Tea have a sticky layer?
Yes. After curing, the material forms a moderate sticky dispersion layer.
12. How long does HEYLOVE Frame Gel Milk Tea need to cure?
The recommended curing time is 60–120 seconds in a 48 W LED lamp.
13. Can Milk Tea Frame Gel be used for extensions without filing?
Yes. The formula is suitable for extension techniques without filing. Light surface filing can still be performed when necessary.
14. Does HEYLOVE Frame Gel Milk Tea heat up during curing?
The polymerization heat is moderate and does not exceed 37 °C under the stated conditions.
15. Does the 30 ml Milk Tea Frame Gel come with a pump?
No. This version comes in a 30 ml jar with a sealed valve and without a pump. The gel is dispensed with a spatula and applied with a separate brush.
Payment Options
We provide various payment methods for your convenience:
-
PayPal: Fast and secure payments with PayPal, offering buyer protection.
-
Credit and Debit Cards: Pay directly with your credit or debit card for easy checkout.
-
Cash on Delivery: Available in select countries for added convenience.
