Description
MULTIBOR 406702 is a carbide cylinder nail drill bit with a green cut and parallel teeth. With a 2.3 mm working diameter, it is designed for targeted podology procedures, including the removal of hard corns (core corns) and precise work on localized areas of thickened skin.
The cylindrical shape provides a narrow working surface for controlled treatment of small areas. The parallel tooth pattern is suitable for precise material removal during podology procedures.
Key Features
-
Brand: MULTIBOR
-
Model: 406702
-
Product type: Carbide podology drill bit
-
Shape: Cylinder
-
Cut type: Parallel teeth
-
Cut color: Green
-
Working diameter: 2.3 mm
-
Material: Carbide
-
Main application: Podology and removal of hard corns
Applications
MULTIBOR 406702 is designed for podology procedures, including:
-
Removal of hard corns / core corns
- Targeted treatment of localized thickened skin
- Precise work on areas requiring controlled material removal
- Preparation and correction of the affected area during podology procedures
The narrow cylindrical working surface allows the bit to be positioned precisely on a localized area.
How to Use
Select the rotation speed according to the procedure and the condition of the treated area. Work with controlled movements and appropriate pressure, avoiding unnecessary removal of surrounding healthy tissue.
Use the bit only for its intended application and follow established podology procedures.
Disinfection
- After use, place the carbide bit into a suitable disinfectant solution. Follow the concentration and exposure time specified by the disinfectant manufacturer.
- Clean the working surface from residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, an ultrasonic cleaner is recommended.
- Rinse under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization
Autoclave:
Place the cleaned and completely dried bit into a sterilization pouch, seal it and process in an autoclave.
Recommended cycle: 132°C, 2 bar, 20 minutes.
Dry heat:
Place the cleaned and dried bit into a dry-heat sterilizer.
Recommended cycle: 180°C, 60 minutes.
