Description
Carbide nail drill bit 21023 in a cylindrical shape features a red fine cross-cut and a working diameter of 2.3 mm with a working length of 14 mm. The cylindrical shape is suitable for controlled nail correction and targeted removal of material during manicure, pedicure and podology procedures.
The fine cross-shaped teeth are designed for working with nail materials during correction, including removing detached areas, excess gel polish or polish and correcting the arch of the nail plate.
Key Features
-
Product type: Carbide nail drill bit
-
Model: 21023
-
Shape: Cylinder
-
Cut type: Cross-shaped teeth
-
Cut color: Red
-
Abrasiveness: Fine
-
Working diameter: 2.3 mm
-
Working length: 14 mm
-
Shank diameter: 2.35 mm
-
Recommended rotation: Up to 20,000 RPM
The listed specifications for model 21023 confirm the cylindrical shape, red fine cut, 2.3 mm working diameter, 14 mm working length and 2.35 mm shank.
Applications
The 21023 carbide cylinder bit is suitable for:
- Removing detached areas during nail correction
- Removing part of the nail plate when required
- Removing excess material and raised edges of polish and gel polish
- Correcting the arch of the nail plate
- Targeted nail correction during manicure and pedicure procedures
- Selected podology procedures
How to Use
Select the rotation speed according to the material and procedure. Work with controlled movements and light pressure, avoiding prolonged contact in one area.
When working on the natural nail plate, remove only the amount of material required for the procedure and avoid unnecessary contact with healthy nail tissue.
Disinfection
- After use, place the carbide bit into a suitable disinfectant solution. Follow the concentration and exposure time specified by the disinfectant manufacturer.
- Clean the working surface from material residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, an ultrasonic cleaner is recommended.
- Rinse under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization
Autoclave:
Place the cleaned and completely dried bit into a sterilization pouch, seal it and process in an autoclave.
Recommended cycle: 132°C, 2 bar, 20 minutes.
Dry heat:
Place the cleaned and dried bit into a dry-heat sterilizer.
Recommended cycle: 180°C, 60 minutes.
